A memory card suitable for Phoenix PCM+3.2 and one of thefollowing Bus Connection Units is required. No PC card is provided with the Unit.Model: C500F-CPUA1-V1(3G2C3-CPUA1-V1).
C500F-CP CPU Programmable Controller C500F-CPUA1-V1.One Ethernet Option Board can be mounted in either option board slot 1 or 2 CS1G-CPU45-EV1 OPERATION MANUAL.
Note: Cannot be used for the CP1L-L10.CV500-MC Special I/O Unit Motion Control Servo Control 4 axis CV500-MC421 CS1G-CPU45-EV1C1000H-SL SYSMAC BUS SYSMAC LINK C1000H-SLK21.CPU Unit: CP1L-L CPU Units with 10 Point.
Specifications: CPU type, Memory capacity: 5K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, DC power supply; Output method, Transistor output (sinking);
Inputs, 6; Output, 4 CS1G-CPU45-EV1 OPERATION MANUAL.
Standards: UC1, N, L, CE.
High Performing Programmable Controller with Embedded Ethernet.
"CP1L-EM" and "CP1L-EL" has a standard-feature Ethernet port.
"CP1L-M" and "CP1L-L" has a standard-feature peripheral USB port.
Function blocks (FB) allow you to build up modular structure and,
programming of ladder diagrams. Unit type: CJ1 Basic I/O Units CS1G-CPU45-EV1 OPERATION MANUAL.
name: B7A Interface Units.
Specifications: I/O points, 32 inputs/outputs;
External connection, Removable terminal block.
No. of words allocated: 4 words.
Current consumption: 5V, 0.07A; 24V, --.
Standards: UC1, CE.
It transmits 16 points of I/O signals per,
word with a pair of cables.
Easy and minimized wiring effort,
The B7A Interface Unit and B7A Link Terminal,
can be used in the same way as a standard,
Basic I/O Unit and I/O Terminal without,
any need to worry about communications.
This characteristic reduces the wiring,
when using more than one relatively remote,
sensor or actuator.
Name: SYSMAC LINK Fiber-optic Power Supply.
Model: C200H-APS01.Control specifications: voltage output / pulse train output.
Axis of control: 1.
Location data: 200.
Connection with servo motor drive,
The location data is transmitted by PC to carry out high precision positioning.
Can set the number of different types of products and location parameters, and can monitor the operation process online.
Equipment operation is flexible and convenient, can achieve start and pause,
Automatic and manuaal mode switching, counting and zero, cylinder pressure time adjustment, etc CS1G-CPU45-EV1 Manual. .
Screw automatic discharge, feeding, fixed, the machine is automatically completed by one time, without manual assistance.
High speed production beatt, can achieve a single station speed of not less than 1-1 CS1G-CPU45-EV1 Manual. 5 seconds / piece.
Positioning accuracy is high, the position error is not more than 0.02 mm.