Name: MIL Connectors.
Specifications: Inputs;
16 inputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CS1G-CPU42-EV1 INSTRUCTIONS REFERENCE MANUAL CS1G-CPU42-EV1
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. C500-AD Special I/O Unit Analog Input C500-AD501.
Input: 16 pts.
Specification: 0~+5V, 0~+10V, -5~+5V
-10~+10V, 0~+20mA, -20~+20mA CS1G-CPU42-EV1 INSTRUCTIONS REFERENCE MANUAL. Unit type: CJ1 Basic I/O Units.
name: B7A Interface Units.
Specifications: I/O points, 64 outputs;
External connection, Removable terminal block.
No. of words allocated: 4 words.
Current consumption: 5V, 0.07A; 24V, --.
Standards: UC1, CE.
It transmits 16 points of I/O signals per,
word with a pair of cables.
Easy and minimized wiring effort,
The B7A Interface Unit and B7A Link Terminal,
can be used in the same way as a standard,
Basic I/O Unit and I/O Terminal without,
any need to worry about communications CS1G-CPU42-EV1 INSTRUCTIONS REFERENCE MANUAL.
This characteristic reduces the wiring,
when using more than one relatively remote,
sensor or actuator.
CV500-RM SYSMAC BUS Remote I/O Master Unit (optical) CV500-RM211.
Light type.Number of inputs: 16 pts.
Input Voltage: 24V DC.
Input Current: 6 mA.Output method: Transistor sourcing.
Inputs: 24.
Outputs: 16.Model: C200H-OD216.
No. of points: 8 pts.
Specifications: 0.8 A, 24 VDC. source type (PNP). with load short protection.I/O capacity: 512 pts (2, 048 max. with remote I/O).
Execution time: Basic: 0.15 µs min.Special: 0.6 µs min.
Unit type: CS-series Special I/O Units.
Product name: Analog Input Units.
Specifications: I/O points, 4 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settablle to 1/4,000);
Conversion speed, 250 s/point max CS1G-CPU42-EV1 Manual.
(Settable to 1 ms/point).
Externa connection, Removable terminal block.
Current consumption: 5V, 0.12A; 26V, 0.09A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Anaalog Input Units for converting,
analog input signals into binary data CS1G-CPU42-EV1 Manual.
Analog Output Units for converting ,
binary data into analog output signals.