LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
ZX-LD30V Smart Sensors
OMRON ZX-LD30V Manual And Instructions
ZX-LD30V datasheetPDF datasheet
ZX-LD30V User's Manual
ZX-LD30V User's Manual
ZX-LD30V Inductive DisplacementIntroduction Manual
ZX-LD30V OPERATION MANUAL

OMRON ZX-LD30V Product information and technical parameters:
Brand: OMRON
Name: Smart Sensors
Model: ZX-LD30V
Optical system: Regular reflective.
Beam shape: Spot beam.
Sensing distance: 30±2 mm.
Resolution: 0.25 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.

High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: there.
Shape: shield, M12.
Detection range: 3mm.
Action mode: NC. Size: M30, Non-shielded.
Sensing distance: 20.0 mm.
Connection: M12 connector ZX-LD30V.
Body material: Brass.
Thread length (overall length): 44 (58)(See note ZX-LD30V).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) ZX-LD30V.
Modular construction simplifies customization. Appearance: T-shaped, slot center 10 mm.
Sensing method: L-shaped.
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light.
Model: PNP output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity ZX-LD30V.
Series includes models that enable switching between,
dark-ON and light-ON operation.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: below.
Detection range: 2.5mm.
Action mode: NO. Appearance: R-shaped.
Sensing method: Through beam (with slot).
Sensing distance: 5 mm (slot width).
Output configuration: Light-ON Dark-ON (2 outputs).
Connection method (Cable length): Pre-wired model with robot cable (1 m).
Output type: NPN.
Meeting Customer Needs with.
Ultra-compact Sensors that Mountt ZX-LD30V.
with M3 Screws.
Mount using M3 or M2 screws.
Reliable sensing slot depth of 6.5 mm.
Indication of sensing window for easy confirmation of,
insertion depth.
Bright indicator for confirmation from many directions.
Both light-ON and dark-ON outputs provided ZX-LD30V.
All models available with either standard cable or,
flexible robot cable.
Load short-circuit protection circuit provided.


...More relevant models >>>>
Last one: OMRON ZX-LD300L
next one: OMRON ZX-LD30VL