LK Automation Limited
Brand:
OMRON
ZS-LD50S 2M CMOS 2D laser type intelligent sensor
OMRON ZS-LD50S 2M Product information and technical parameters：
Brand: OMRON
Name: CMOS 2D laser type intelligent sensor
Model: ZS-LD50S 2M
Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: point beam.
Beam diameter: diameter of 50 m.
Resolution: 0.8 M.
Cable length: 2m.
Size: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 39 (59).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor ZS-LD50S 2M.
Problems such as the collision of workpieces are eliminated ZS-LD50S 2M
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Size: 8 dia.
Type: Ultra-low-load Type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZS-LD50S 2M. Sensing method: Through-beam type (with slot).
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Dark-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization ZS-LD50S 2M.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Power supply voltage: 12 VDC.
Output configuration: Open-collector output.
Resolution (pulses/rotation): 1,000; 2,000; 3,600; 5,000; 6,000.
High-resolution Enccoder ZS-LD50S 2M.
Incremental model.
External diameter of 55 mm.
Resolution of up to 6,000 ppr. Item: Sensor Head - Controller Extension Fiber Cable,
(flexible cable) (Fiber Adapter ZW-XFC provided).
Cable length: 5m.
To achieve a compact Sennsor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects ZS-LD50S 2M.
This principle is described below.
Sensing distance: 8.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 39 (59).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor ZS-LD50S 2M.
Problems such as the collision of workpieces are eliminated ZS-LD50S 2M
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Size: 8 dia.
Type: Ultra-low-load Type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZS-LD50S 2M. Sensing method: Through-beam type (with slot).
Sensing distance: 5 mm (slot width).
Output type: NPN output.
Output configuration: Dark-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization ZS-LD50S 2M.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Power supply voltage: 12 VDC.
Output configuration: Open-collector output.
Resolution (pulses/rotation): 1,000; 2,000; 3,600; 5,000; 6,000.
High-resolution Enccoder ZS-LD50S 2M.
Incremental model.
External diameter of 55 mm.
Resolution of up to 6,000 ppr. Item: Sensor Head - Controller Extension Fiber Cable,
(flexible cable) (Fiber Adapter ZW-XFC provided).
Cable length: 5m.
To achieve a compact Sennsor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects ZS-LD50S 2M.
This principle is described below.
...More relevant models >>>>
Related download