LK Automation Limited
Brand:
OMRON
S8M-CP04 Digital Multicircuit Protector
OMRON S8M-CP04 Manual And Instructions
S8M-CP04 datasheetPDF datasheet
S8M-CP04 USER'S MANUAL
S8M-CP04 EtherNet/IP Connection Guide
OMRON S8M-CP04 Product information and technical parameters：
Brand: OMRON
Name: Digital Multicircuit Protector
Model: S8M-CP04
Communications: None.
UL Class 2 output: Not compliant.
Complete Flexible DC Circuit Protector That.
Has a Wide Array of Displays, Alarm,
Outputs, and Other Digital Functions.
Four circuit protectors in one package.
Simple setting of current tripping values for each branch outputs,
in 0.1-A units.
Startup and shutdown sequence control.
Display and alarm functions (Input voltage, output current,
run time, and over-temperature),
Outputs conform to UL Class 2 (at 24 VDC, S8M-CP04-RS only),
DIN Rail mounting.
RoHs-compliant.
Free Support Tool available.
...More relevant models >>>>
S8M-CP04 datasheetPDF datasheet
S8M-CP04 USER'S MANUAL
S8M-CP04 EtherNet/IP Connection Guide
OMRON S8M-CP04 Product information and technical parameters：
Brand: OMRON
Name: Digital Multicircuit Protector
Model: S8M-CP04
Communications: None.
UL Class 2 output: Not compliant.
Complete Flexible DC Circuit Protector That.
Has a Wide Array of Displays, Alarm,
Outputs, and Other Digital Functions.
Four circuit protectors in one package.
Simple setting of current tripping values for each branch outputs,
in 0.1-A units.
Startup and shutdown sequence control.
Display and alarm functions (Input voltage, output current,
run time, and over-temperature),
Outputs conform to UL Class 2 (at 24 VDC, S8M-CP04-RS only),
DIN Rail mounting.
RoHs-compliant.
Free Support Tool available.
Type: insert type.
IO points (number of poles): 34.
The PLC connection type and the rich polar number of PLC are specially connected.
PLC connection type for the use of OMRON and MITSUBISHI motor,
PLC (plant) production of specialized connection wiring mode, to facilitate the confirmation signal configuration S8M-CP04.
In addition, the terminal table record PLC address on the label.
Universal type for a variety of connectors, the number of species S8M-CP04
Connection with cross recessed screws, slotted screw type and insertion type.
DIN guide rail and screw can be used to install.
Terminal arrangement fully considers the maneuverability, makes the connection operation become easy and simple.
The operability of the plug-in terminal can be improved (XW2F comparison of the company) S8M-CP04.
Time specification: Inverse type.
Current setting range: 2 to 8 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase S8M-CP04.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Measuring voltage: 6 to 60 mV AC/DC, 10 to 100 mV AC/DC, 30 to 300 mV AC/DC.
Supply voltage: 100-115 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resetting and auttomatically resetting supported by one Relay S8M-CP04.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and normally closed.
Process control signal (0 to 10 V) and current splitter input ssupported S8M-CP04.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply.
IO points (number of poles): 34.
The PLC connection type and the rich polar number of PLC are specially connected.
PLC connection type for the use of OMRON and MITSUBISHI motor,
PLC (plant) production of specialized connection wiring mode, to facilitate the confirmation signal configuration S8M-CP04.
In addition, the terminal table record PLC address on the label.
Universal type for a variety of connectors, the number of species S8M-CP04
Connection with cross recessed screws, slotted screw type and insertion type.
DIN guide rail and screw can be used to install.
Terminal arrangement fully considers the maneuverability, makes the connection operation become easy and simple.
The operability of the plug-in terminal can be improved (XW2F comparison of the company) S8M-CP04.
Time specification: Inverse type.
Current setting range: 2 to 8 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase S8M-CP04.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Measuring voltage: 6 to 60 mV AC/DC, 10 to 100 mV AC/DC, 30 to 300 mV AC/DC.
Supply voltage: 100-115 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resetting and auttomatically resetting supported by one Relay S8M-CP04.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and normally closed.
Process control signal (0 to 10 V) and current splitter input ssupported S8M-CP04.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply.
...More relevant models >>>>