LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
H3RN-11-B Solid-state timer
OMRON H3RN-11-B Manual And Instructions
H3RN-11-B datasheetPDF datasheet

OMRON H3RN-11-B Product information and technical parameters:
Brand: OMRON
Name: Solid-state timer
Model: H3RN-11-B
Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: SPDT.
Long-time range model (0.1 min to 10 h).
Compact, Multi-function Timers,
for G2R Relay Socket.
The Push-In Plus Terminal Block Socket-compatible H3RN-@-B.
Timers in a black design join the Compact, Multi-function H3RN Timers.
Standard multiple time ranges and multiple operating modes.
UL listed.
Conforms to CSA and CE Marking.

Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
High speed pulse.
Measuring, increasing or decreasing pulse meter H3RN-11-B.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase difference pulse is 25kHz, increase or decrease of pulse is 30kHz H3RN-11-B
Supports no voltage contact input to 30Hz.
The count value can be converted to any value.
Operating modes: Power OFF Delay H3RN-11-B.
Supply voltage: 200 to 240 VAC.
Control output: Contact output: SPDT.
H3DK-H: L Series (time range: 1.0 to 120 s).
Set two time ranges with each Timer, from 0.1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series. Operating modes: Power OFF Delay.
Supply voltage: 200 to 240 VAC.
Control output: Contact output: SPDT.
H3DK-H: S Series (time range: 0.1 to 12 s) H3RN-11-B.
Set two time ranges with each Timer, from 0.1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series. Input type: PNP input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Relay contact: HH; PASS1c, H, L, LL: each 1a.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
Digital rotating pulse meter with high speed measurement for 50kHz.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Rotary encoder and a variety of ON/OFF pulse signals, the most up to 50kHz of high-speed pulse measurement. Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
BCD+ transistor: -- NPN open collector (5 bit output +HH, H, PASS, L, LL).
96 (W) * 48 (H ** 95mm) depth H3RN-11-B.
Power supply voltage: AC100 ~ 240V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Acction determine the color, can switch the green / Red 2 kinds of color display H3RN-11-B.
Equipped with the sub pressure gauge for monitoring the operation trend


...More relevant models >>>>
Last one: OMRON H3RN-2-B
next one: OMRON H3RN-21-B