LK Automation Limited
Brand:
OMRON
E3Z Series Sensors
OMRON E3Z Series Manual And Instructions
E3Z Series datasheetPDF datasheet
E3Z Series INSTRUCTION sheet
OMRON E3Z Series Product information and technical parameters：
Brand: OMRON
Name: Sensors
Model: E3Z Series
Mounting method.
Hook the upper protruding portion,
of the Slit to the upper indented,
mounting portion of the Sensor,
and adjust the position of the Slit,
so that the Slit will be in parallel to,
the lens side of the Sensor.
Press the lower protruding portion,
of the Slit onto the indented,
mounting portion of the Sensor,
until the Slit snaps in.
...More relevant models >>>>
E3Z Series datasheetPDF datasheet
E3Z Series INSTRUCTION sheet
OMRON E3Z Series Product information and technical parameters：
Brand: OMRON
Name: Sensors
Model: E3Z Series
Mounting method.
Hook the upper protruding portion,
of the Slit to the upper indented,
mounting portion of the Sensor,
and adjust the position of the Slit,
so that the Slit will be in parallel to,
the lens side of the Sensor.
Press the lower protruding portion,
of the Slit onto the indented,
mounting portion of the Sensor,
until the Slit snaps in.
Field of view: Narrow View.
Number of pixels: 350,000 pixels.
Monochrome: NPN.
Field of view/Installation distance: Refer to figure 1 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller E3Z Series E3Z Series
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Optical system: Through-beam.
Measuring width: 30 mm.
Sensing distance: 0 to 500 mm.
Resolution: 12 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website E3Z Series. Slit width: 1-mm dia.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@. Size: M8(Stainless steel)(See note 2.); Double; Shielded.
Sensing distance: 2 mm.
Connecting method (See note 1.): Pre-wired.
Body length: Short.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. The ultra small size, high performance and rich models E3Z Series.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: above.
Detection range: 2.5mm.
Action mode: NO. Type: Shielded.
Appearance: Flat, 30 × 14 × 4.8 mm.
Sensing distance: 5 mm.
Repeat accuracy: 2 μm.
Cable specification: Free cutting .
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.44-dia E3Z Series. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening witth,
fine positioning to maximize variations E3Z Series.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
Number of pixels: 350,000 pixels.
Monochrome: NPN.
Field of view/Installation distance: Refer to figure 1 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller E3Z Series E3Z Series
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Optical system: Through-beam.
Measuring width: 30 mm.
Sensing distance: 0 to 500 mm.
Resolution: 12 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website E3Z Series. Slit width: 1-mm dia.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@. Size: M8(Stainless steel)(See note 2.); Double; Shielded.
Sensing distance: 2 mm.
Connecting method (See note 1.): Pre-wired.
Body length: Short.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. The ultra small size, high performance and rich models E3Z Series.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: above.
Detection range: 2.5mm.
Action mode: NO. Type: Shielded.
Appearance: Flat, 30 × 14 × 4.8 mm.
Sensing distance: 5 mm.
Repeat accuracy: 2 μm.
Cable specification: Free cutting .
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.44-dia E3Z Series. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening witth,
fine positioning to maximize variations E3Z Series.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
...More relevant models >>>>