LK Automation Limited
Brand:
OMRON
E2G-M18KS05-WS-C2 Cylindrical proximity sensor
OMRON E2G-M18KS05-WS-C2 Product information and technical parameters：
Brand: OMRON
Name: Cylindrical proximity sensor
Model: E2G-M18KS05-WS-C2
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / wire type.
Shape: shield, M18.
Detection range: 5mm.
Output configuration: NPN.
Action mode: NC.
The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: above E2G-M18KS05-WS-C2.
Detection range: 2.5mm.
Action mode: NO. Appearance: Shielded, M30.
Sensing distance: 10 mm E2G-M18KS05-WS-C2
Output configuration : DC 2-wire.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. Name: Tape reflector.
Directional angle: 30° min.
Ambient operating temperature range: 0 to 40°C E2G-M18KS05-WS-C2.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 85%.
Degree of protection: IEC IP67.
Accessories: --. E3JK-R41J regression reflection type,
E3JK communication mode: mode; ON,
Miniature amplifier built-in type photoelectric switch1M E32-T54V type: environmental type; vacuum resistance,
Specialty: L word shape heat: 200,
Shape / detection distance (mm): 500; 660; 330 (180),
Bending radius (mm): R30 E2G-M18KS05-WS-C2.
Standard test object (minimum test object) (mm) 1: 4 (0.1),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: non shield, M18.
Detection range: 14mm.
Action mode: NC. Calculating Unit
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Conneection method: Pre-wired E2G-M18KS05-WS-C2.
Cable length: 2 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece E2G-M18KS05-WS-C2.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: above E2G-M18KS05-WS-C2.
Detection range: 2.5mm.
Action mode: NO. Appearance: Shielded, M30.
Sensing distance: 10 mm E2G-M18KS05-WS-C2
Output configuration : DC 2-wire.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. Name: Tape reflector.
Directional angle: 30° min.
Ambient operating temperature range: 0 to 40°C E2G-M18KS05-WS-C2.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 85%.
Degree of protection: IEC IP67.
Accessories: --. E3JK-R41J regression reflection type,
E3JK communication mode: mode; ON,
Miniature amplifier built-in type photoelectric switch1M E32-T54V type: environmental type; vacuum resistance,
Specialty: L word shape heat: 200,
Shape / detection distance (mm): 500; 660; 330 (180),
Bending radius (mm): R30 E2G-M18KS05-WS-C2.
Standard test object (minimum test object) (mm) 1: 4 (0.1),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: non shield, M18.
Detection range: 14mm.
Action mode: NC. Calculating Unit
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Conneection method: Pre-wired E2G-M18KS05-WS-C2.
Cable length: 2 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece E2G-M18KS05-WS-C2.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.
...More relevant models >>>>
Related download