LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
E2A-M18KS08-WP-C1 2M Cylindrical Proximity Sensor
OMRON E2A-M18KS08-WP-C1 2M Manual And Instructions
E2A-M18KS08-WP-C1 2M datasheetPDF datasheet

OMRON E2A-M18KS08-WP-C1 2M Product information and technical parameters:
Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2A-M18KS08-WP-C1 2M
Size: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 39 (59).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.

Appearance: Shielded, M12.
Sensing distance: 3 mm.
Output configuration: DC 3-wire (PNP).
Operation mode: NO.
Proximity Sensor Ideal for the Food and Beverage Industry. Size: M30 (brass), single distance, non shield type.
Detection distance: 20mm.
Connection mode: lead type (cable length is 2M and 5m two) E2A-M18KS08-WP-C1 2M.
Thread length: Standard type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor E2A-M18KS08-WP-C1 2M
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor E2A-M18KS08-WP-C1 2M.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Field of view: Wide View (Long-distance).
Number of pixels: 760,000 pixels.
Color: PNP.
Field of view/Installation distance: Refer to figure 7 on p E2A-M18KS08-WP-C1 2M. 20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Name: Sensor.
Easy-to-use, Simple Magnetic.
Proximity Sensor.
Permanent magnetic used to operate the reed switch.
Ideal for detecting opening and closing of doors. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Model: Output configuration: NPN NO.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Continuation of the E6B2 high cost, value also have more choice.
E6B3, E6C4 blockbuster debut! Complementary output of the first starting high anti interference.
40mm diameter, shaft diameter of phi 8mm universal, with strong axial load capacity.
50mm diameter, shaft diameter of phi 10mm rugged, with strong axial load capacity,
At the same time, the use of IP65 anti drip, anti oil structure.
E6B2 complementary output will be issued over the same period.
Connection length to reach a full 30m!
Resolution (pulse / rotaation):10~3600P/R E2A-M18KS08-WP-C1 2M.
Power supply voltage: DC12 ~ 24V
Consumption current: 100mA below.
Output state: complementary output.
Maximum response frequency: 100kHz.
Output phase difference: A phase, B phase difference 90 plus or mminus 45 E2A-M18KS08-WP-C1 2M.
Starting torque: M / 10mN below (at room temperature).
Maximum allowable speed: 6000r/min.
Axial force: radial...... 80N, axial...... 50N.


...More relevant models >>>>