LK Automation Limited
Brand:
OMRON
C200HS-INT01 Interrupt Input Module
OMRON C200HS-INT01 Product information and technical parameters：
Brand: OMRON
Name: Interrupt Input Module
Model: C200HS-INT01
Model: C200HS-INT01.
Rated Input Voltage: 12 to 24 VDC +10%/–15%.
Input Impedance: 2 K.
Input Current: 10 mA typical (24 VDC).
ON Voltage: 10.2 VDC min.
OFF Voltage: 3.0 VDC max.
ON Response Time: 0.2 ms max.
OFF Response Time: 0.5 ms max.
No. of Circuits:
Name: Position Control Module.
Model: C200HW-NC413.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 4.Model: C200HW-ME08K.
Capacity: 8K words.C200H-CPU23-E CPUs
High Spec, Small Rack Style
The C200H-CPU21-E and C200H-CPU23-E controllers offer increased I/O capacity and the same basic functionality as the OEM versions C200HS-INT01 C200HS-INT01 In addition,
these controllers offer an extended instruction set,
these controllers offer an extended instruction set,
expansion. A variety of CPUs are available with various memory and I/O configurations allowing selection based on application requirements.Model: C200HW-PA204R.
Supply voltage: 100 to 120 VAC, 200 to 240 VAC C200HS-INT01.
Comments: With output contacts during operation.100 to 120/200 to 240 VAC (switchable), Wired.Model: C200H-ID215.
No. of inputs: 32 pts.
Specifications: 24VDC.Name: DeviceNet Master Module.
Model: C200HW-DRM21-V1.
Baud rate: 500, 250, or 125 kbps (selectable)
DeviceNet Master Unit
The DeviceNet Master Unit Is a Multi-vendor Bus Conforming to the DeviceNet C200HS-INT01. Name: PC Link Module.
Model: C200H-LK401.
Communications method: 2-conductor, half duplex.
PC Link Unit
Distributed control using the PC Link Unit.1 axis, Pulse input. counting speed: 50 kcps. 5VDC/12 VDC/24 VDC.Model: C200H-ID212.
No. of inputs: 16 pts.
Input voltage: 24VDC, +10%/–15%.
Input current: 7mA, 24VDC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tion: 10mA max.OMRON''s series position and motion controller have been added in mc402e greatly enhanced.
Mc402e is designed as a PLC module and as many as four servo drive shafts provide multi axis complex motion control.
Designed for high level control.
"Information" and "standardization" of the production site
In order to adapt to the needs of consumer diversification,
Requires the production of different varieties, quantity, shorten the development cycle, reduce costs, etc..
The manufacturing industry is facing a very strict business situation.
Thus in the production of increasingly demanding to improve efficiency, flexible.
Thus, _ intelligence, standardization has become a pressing matter of the moment.
In order to achieve this goal, the Sales Department of different network configuration, designed for the use of user specific software tools to unify the use of the environment.
Components to adapt to multi channel control are increasingly entering the commercialization stage.
Co creation will be able to track the market speed of the production site.
In order to build a more convenient system for the user and the sales department.
OMRON actively promote the field of informattion and standardization C200HS-INT01.
The Windows version of the ladder program as a tool in the windows environment of unity.
In addition to Ethernet, the communication protocol macro function must be provided in accordance with DeviceNet/D.
As a result of this kind of environment is all ready, just realized one call that is out, quickly adapt to the market changes of the production environment C200HS-INT01.
Model: C200HW-NC413.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 4.Model: C200HW-ME08K.
Capacity: 8K words.C200H-CPU23-E CPUs
High Spec, Small Rack Style
The C200H-CPU21-E and C200H-CPU23-E controllers offer increased I/O capacity and the same basic functionality as the OEM versions C200HS-INT01 C200HS-INT01 In addition,
these controllers offer an extended instruction set,
these controllers offer an extended instruction set,
expansion. A variety of CPUs are available with various memory and I/O configurations allowing selection based on application requirements.Model: C200HW-PA204R.
Supply voltage: 100 to 120 VAC, 200 to 240 VAC C200HS-INT01.
Comments: With output contacts during operation.100 to 120/200 to 240 VAC (switchable), Wired.Model: C200H-ID215.
No. of inputs: 32 pts.
Specifications: 24VDC.Name: DeviceNet Master Module.
Model: C200HW-DRM21-V1.
Baud rate: 500, 250, or 125 kbps (selectable)
DeviceNet Master Unit
The DeviceNet Master Unit Is a Multi-vendor Bus Conforming to the DeviceNet C200HS-INT01. Name: PC Link Module.
Model: C200H-LK401.
Communications method: 2-conductor, half duplex.
PC Link Unit
Distributed control using the PC Link Unit.1 axis, Pulse input. counting speed: 50 kcps. 5VDC/12 VDC/24 VDC.Model: C200H-ID212.
No. of inputs: 16 pts.
Input voltage: 24VDC, +10%/–15%.
Input current: 7mA, 24VDC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tion: 10mA max.OMRON''s series position and motion controller have been added in mc402e greatly enhanced.
Mc402e is designed as a PLC module and as many as four servo drive shafts provide multi axis complex motion control.
Designed for high level control.
"Information" and "standardization" of the production site
In order to adapt to the needs of consumer diversification,
Requires the production of different varieties, quantity, shorten the development cycle, reduce costs, etc..
The manufacturing industry is facing a very strict business situation.
Thus in the production of increasingly demanding to improve efficiency, flexible.
Thus, _ intelligence, standardization has become a pressing matter of the moment.
In order to achieve this goal, the Sales Department of different network configuration, designed for the use of user specific software tools to unify the use of the environment.
Components to adapt to multi channel control are increasingly entering the commercialization stage.
Co creation will be able to track the market speed of the production site.
In order to build a more convenient system for the user and the sales department.
OMRON actively promote the field of informattion and standardization C200HS-INT01.
The Windows version of the ladder program as a tool in the windows environment of unity.
In addition to Ethernet, the communication protocol macro function must be provided in accordance with DeviceNet/D.
As a result of this kind of environment is all ready, just realized one call that is out, quickly adapt to the market changes of the production environment C200HS-INT01.
...More relevant models >>>>