Function name: 3 phase 200V.
Power: 15KW.
Rated output voltage: 3 phase, 200 ~ 240V (the output voltage can not exceed the input voltage).
Built in brake unit (brake resistance needs to be matched).
Weight: 7.4KG.
Dimension (w * h) 350mm *:220.
Outline dimension (deep):175mm.
Mechanical automation concept 3G8F7-CLK23-E SYSTEM MANUAL.
Positioning function.
The use of options.
(EtherCAT, CompoNet and DeviceNet) to realize the field bus communication 3G8F7-CLK23-E
Driver programming function.
Current vector control.
High starting torque: 0.5Hz up to 200%.
Safety features, in compliance with ISO13849-1:2008 EN (Cat.3/PLd) and IEC60204-1 stop level 0 standard.
Frequency output up to 580H. Inverter input power: 3 phase / single phase AC200V 3G8F7-CLK23-E SYSTEM MANUAL.
Weight: 1.6KG.
Standard applicable line diameter: 2 square mm or more.
Used to suppress harmonic currents generated by a transducer.
The effect of harmonic current suppression is better than that of AC reactor,
And it can be used with AC reactor. The communication unit can connect the multi function small transducer DeviceNet to the MX2 network.
Power supply: through the inverter power supply 3G8F7-CLK23-E SYSTEM MANUAL.
Protection structure: IP20.
Authentication: Conformance testing via DeviceNet.
DeviceNet configuration file: AC driver (0x02). When the power supply capacity exceeds the power supply capacity of the inverter or the need to improve the power factor, it is required to connect the AC reactor.
Please according to the maximum capacity of heavy load and light load rated conditions suitable for motor to select option. Connection type: PCI, wired CLK.
Description: Controller link PCI board with support software.Applicable converter capacity: maximum 5.5KW, minimum 0.1KW.
Connected to the converter input / output cable,
Reduce the noise from the power supply line to the frequency converter or from the converter to the power line. Function name: single phase 200V.
Power: 0.4KW.
Rated output voltage: 3 phase, 200 ~ 240V (the output voltage can not exceed the input voltage).
Built in brake unit (brake resistance needs to be matched).
Weight: 1.1KG.
Dimension (w * h) 128mm *:68.
Outline dimension (deep):122.5mmm 3G8F7-CLK23-E Manual.
Mechanical automation concept.
Positioning function.
The use of options.
(EtherCAT, CompoNet and DeviceNet) to realize the field bus communication.
Driver programming function.
Current vector control.
High starting torque: 00 3G8F7-CLK23-E Manual. 5Hz up to 200%.
Safety features, in compliance with ISO13849-1:2008 EN (Cat.3/PLd) and IEC60204-1 stop level 0 standard.
Frequency output up to 580H.