Short protection for 10-pin terminal block (package of 10 covers). 12 pts.Model: CPM2C-10C1DT1C-D. CPU Unit: Units with 10 I/O points.
2 Fujitsu connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: Yes.Connects Power Supply Adapter and SYSMAC NET Link Unit CP1H-XA40DT1-D REFERENCE MANUAL.
Included with C200H-APS02.For 10-slot Backplane CP1H-XA40DT1-D2 thermocouple inputsC200H A Backplane I/O Mounting Bracket For 3 Slots C200H-ATT33.Specifications: 1 × RS-232C port + 1 × RS-422/485 port, protocol macro function.Unit classification: CJ1 Special I/O Units.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface:Pulse-train line-driver,
output with Pulse Counter Function;
Number of control axes : 4 axes CP1H-XA40DT1-D REFERENCE MANUAL.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.31A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speed.
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs CP1H-XA40DT1-D REFERENCE MANUAL.
Control 2 or 4 Axes High-speed, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors. Model: C200HW-BI031.
No. of I/O slots: 3 slots.Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurrement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program CP1H-XA40DT1-D Manual.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communicaations procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components CP1H-XA40DT1-D Manual.