Model : C500-LK103.
PCF.Used to attach Hand-held Programming Console to a panel.C500-ID I/O Unit DC Input 32 pts C500-ID218(3G2A5-ID218).
DC12-24V 10mA.Name: SYSMAC LINK Module.
Model: C200HW-SLK14.
Communications method: N: N token bus.
Transmission method: Manchester code, base band.
Transmission path: Daisy chain CJ1G-CPU43P INSTRUCTIONS REFERENCE MANUAL.
Weight: 500g max.CPU Unit: CP1H-XA CPU Units CJ1G-CPU43P
Specifications: CPU type, Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Analog inputs: 4, Analog outputs: 2;
Power supply, AC power supply; Output method, Relay output;
Inputs, 24; Output, 16.
Standards: UC1, N, L, CE.
4 Axis Position Control and Comprehensive Programmable Controller CJ1G-CPU43P INSTRUCTIONS REFERENCE MANUAL.
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O. I/O Slave Unit.
Number of words: 64Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Independent.Name: Three-tier Screw Terminal Block.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; NPN;
Without Short-circuit and,
Disconnected Line Detection CJ1G-CPU43P INSTRUCTIONS REFERENCE MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. vC200H Accessory Interface Unit C200H-IP006Model: CPM2C-16EDM. Units with inputs only.
1 MIL connector.
Inputs: 16 inputs.
Outputs: ---.
Input type: 24 VDC.
Output type: --.Unit type: CJ1 CPU Bus Units.
Product Name: Serial Communications nits.
Specifications:Communications Interface,
2 RS-232C ports;
Communications functions,
The following functions can be,
selected for each port:
Protocol macro Host Link,
NT Links (1:N mode)Serial Gateway,
No-protocol Modbus-RTU Slave.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.28A; 244V,-- CJ1G-CPU43P Manual.
Standards: UC1, N, L, CE.
The Serial Communications Units That Enable,
High-speed Connections with External Devices.
Each Serial Communications Unit provides two,
serial communications ports: RS-232C and,
RS-422A/485,, and the serial communications,
mode can be set separately for each port from,
Protocol Macro, Host Link, NT Link,
Serial Gateway, and No-protocol CJ1G-CPU43P Manual.