Shape: Cylindrical.
Dimensions: 5.4 dia. x 18 mm.
Sensing distance: 1 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function ZFV-LTF01 OPERATION MANUAL.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit ZFV-LTF01
Prevent mutual interference for up to five Units by using a Calculating Unit. Item (Measured particle diameter): Air Particle Sensor,
Dust measurement type, 5 µm (10 µm), 20 µm (30 µm), 50 µm min.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control ZFV-LTF01 OPERATION MANUAL. Optical system: Through-beam.
Measuring width: 5 mm.
Sensing distance: 0 to 500 mm.
Resolution: 4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s ZFV-LTF01 OPERATION MANUAL.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 60 M.
Resolution: 0.8 M.
Cable length: 2m. Foreign matter on the surface of a vibrating object,
Offset core operation of the joint segment is poor, etc.,
Can refer to the waveform set, extraction.
Joint detection of wrapping paper.
Fiber burr belt.
Drum segment detection.
Seam detection. Classification: Momentary operation.
Shape of Operation Unit: 36 dia. 25 dia.
Output: 1.
Operation Unit color: Yellow ((-Y) ZFV-LTF01 Manual.
Long Service Life with Built-in Z-series.
Basic Switch.
Using a Basic Switch enables direct switching of large-capacity loads.
Shock-absorbing construction of Operation Unit protects the Switch.
Drip-proof Pushbutton consstruction enables use in locations subject to,
splashing water and oil and scattering dust ZFV-LTF01 Manual.
Pushbuttons are available in three shapes and six colors.