LK Automation Limited LK Automation Limited
Download Sort: OMRON
Home >> Manual Download
K2CM-1M Communications Manual ()
Product model: K2CM-1M
Name: Digital Temperature Controllers
Brand: OMRON
Sort: Communications Manual
File language: English
Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: HH; PASS1c, H, L, LL: each 1a.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified K2CM-1M Communications Manual K2CM-1M
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurementProduct: Straight Bar Nozzle; 300 mm K2CM-1M Communications Manual.
Wide Range of Nozzles for Optimal.
Ionization.
A wide range of nozzle variations.
High-frequency AC method with excellent ion balance. Rated input voltage: 3-phase 3-wire mode, 200, 220, 230, or 240 VAC.
Ideal for Monitoring 3-phase Power Supplies.
for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor undervoltages, overvoltages, voltage asymmetry, phase,
sequence, and phase loss in three-phase three-wire circuits with one unit K2CM-1M Communications Manual.
One SPDT output relay, 5 A at 250 VAC (resistive load).
World-wide power specifications supported by one unit.
(Set with a rotary switch.).
Relay status can be monitored using LED indicator. Product: Flexible Tube Nozzle; 500 mm.
Wide Range of Nozzles for Optimal.
Ionization.
A wide range of nozzle variations.
High-frequency AC method with excellent ion balance. Ideal for Current Monitoring for.
Industrial Facilities and Equipment.
Monitor for overcurrents or undercurrents.
Use commercially available CTs (CT current on secondary,,
side: 0 to 1 A or 0 to 5 A) K2CM-1M Manual.
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately.
One SPDT output relay, 5 A at 250 VAC (resistive load).
Output relay can bbe switched between normally open and normally closed K2CM-1M Manual.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply.
Related products
OMRON
Over current relay
K2CA-HC
OMRON Over current relay K2CA-HC
Appearance: ADR shell. Circuit structure
OMRON
Heater Element Burnout Detector
K2CU-F10A-D
OMRON Heater Element Burnout Detector K2CU-F10A-D
Control supply voltage: 110 VAC With vo
OMRON
Heater Element Burnout Detector
K2CU-F40A-CGS
OMRON Heater Element Burnout Detector K2CU-F40A-CGS
Control supply voltage: 100 VAC With vo
OMRON
Heater Element Burnout Detector
K2CU-F40A-DGS
OMRON Heater Element Burnout Detector K2CU-F40A-DGS
Control supply voltage: 110 VAC With vo