Supply voltage: 12 VDC.
Control output: Contact output, SPDT (time-limit SPDT).
Eight-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT output contacts using a switch H7HP-A Communications Manual.
Sequence checks are easily performed by setting an instanta,
neous output to 0 H7HP-A
Start signal control for the H3DK-M. Supply voltage: 100 to 240 VAC.
8-digit total counter: Black.
DIN 72 x 36-mm Total Counter/Time Counter with.
Easy-to-read Displays and Water and Oil.
Resistance Equivalent to IP66.
Large, easy-to-read displays: 15-mm-high characters for 6-digit mod,
els; 12-mm-high characters for 8-digit models H7HP-A Communications Manual.
High-visibility, negative transmissive LCD display with built-in red LED,
backlight at low power consumption.
IP66 with oil resistance and NEMA4 are achieved by unifying the front,
with the casing case and using oil-resistant materials and parts.
Compact (66 mm) body.
Switch 6-digit models between total counter and time counter operation,
Just change a switch setting for either an NPN or PNP input H7HP-A Communications Manual.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents electrical shock and,
conforms to VDE0106, Part 100.
Safety standards: UL, CSA, EMC (EN 61326), CE Marking.
Easy to Use and Easy to Read.
Basic Features.
Character height of 10 mm for better readability.
Operation is simplified by the Up Key for each digit.
Safety and Reliability.
Power supply circuit and input circuits are isolated inside the Counter.
Set value limit function prevents unexpected operation of output,
devices caused by setting mistakes.
Output counter function helps in managing the service life of the,
Counter or the load.
Other Features.
Waterproof, dust-proof structure (UL508 Type 4X and IP66).
Key protection. Operating method: ncrementing and decrementing (selectable with DIP switch).
Mounting method: Flush mounting.
Input signal method (Count and reset inputs): Contact and transistor input, vvoltage (H and L) H7HP-A Manual.
Memory backup: No .
Display: Yes (10-mm high 7-segment LED).
Models: 4 digits.
A DIN 72 x 72 mm Best-selling Counter.
Easy setting with thumbwheel switches.
A draw-out construction enables maintenance without rrewiring H7HP-A Manual.
Models with 2-, 4-, 6-, or 8-digit displays are also available.
Total Counter models are also Available.
Complies with UL and CSA Marking.