Supply voltage: 24 VDC.
Time-limit contact: 4PDT(Twin contacts).
Short-time range model (0.1 s to 10 min).
Miniature Timer with Multiple Time.
Ranges and Multiple Operating Modes.
Minimizes stock.
Pin configuration compatible with MY Power Relay.
Standard multiple operating modes and multiple time ranges H7E_-F Communications Manual.
Conforms to EN 61812-1 and IEC 60664-1 for Low Voltage,
and EMC Directives H7E_-F Operating modes: Flicker ON start.
Supply voltage: 100 to 240 VAC/100 to 125 VDC, 24 to 48 VAC/12 to 48 VDC.
0.05 s to 300 h models: 11-pin models.
DIN 48 × 48-mm Twin Timers.
Wide power supply ranges of High Voltage 100 to 240 VAC/100,
to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC.
ON- and OFF-times can be set independently and so,
combinations of long ON- or OFF-time and short OFF- or ON,
time settings are possible H7E_-F Communications Manual.
Twenty-four time ranges from 0.05 s to 300 h depending on the,
model to be used.
Models with a flicker ON start or flicker OFF start are available.
Easy sequence checks through instantaneous outputs for a,
zero set value at any time range.
Length, when panel-mounted with a Socket, of 80 mm or less H7E_-F Communications Manual.
11-pin and 8-pin models are available. Supply voltage: 24, 100 to 120, 200 to 230 VAC;
12, 24, 48, 100 to 110, 125 VDC.
Time-limit contact: DPDT.
Long-time range model(0.1 min to 10 h).
Miniature Timer with Multiple Time.
Ranges and Multiple Operating Modes.
Minimizes stock.
Pin configuration compatible with MY Power Relay.
Standard multiple operating modes and multiple time ranges.
Conforms to EN 61812-1 and IEC 60664-1 for Low Voltage,
and EMC Directives. Compact Economical Totalizer with High Visibility.
Available with Backlit LCD Display.
Large display with 8.6-mm character height.
Includes new models with backlight for improved visibility in dimly lit places. (Requires 24-VDC power supply.).
Black and light-gray cases now available.
PNP/NPN universal DC voltage input types now available.
Battery is replaceable for Totalizer reuse and conservation of the environment.
Key-protect switch to prevent faulty reset key operation.
Dual operation mode.
Front face compatible with NEMA4/IP66.
Short body, all models have a depth of 48.5 mm.
Finger protection terminnal block conforms to VDE0106, Part100 H7E_-F Manual.
Conforms to UL, CSA, and CE marking.
Conforms to EN61010-1 (pollution degree 2/overvoltage category III.).
Conforms to EMC standards and EN61326, thus allowing use in residential,
commerciall and light- and heavy-industry environments H7E_-F Manual.
Six-language instruction manual provided.
PCB-mounting models available. (Requires 3-V power supply.).