Operation / reset system: time limit operation / auto reset.
Time limit contact: 4PDT.
Time range: 0.1s ~ 30min.
Supply voltage: AC110V, AC220V (50/60Hz); DC24V.
Mounting: surface /DIN guide rail mounting (with socket).
Micro timer compatible with MY relay.
ON delay function, can accurately control the time H7CX-A11SD1-N Communications Manual.
Large and transparent time setting knob is easy to set up time H7CX-A11SD1-N
Pin configuration compatible with MY power relay.
Access to UL, CSA and CCC certification in line with EN61812-1 and EMC standards. Operation/resetting system: Time-limit operation/self-resetting.
Time-limit contact: 4PDT.
Time ranges: 0.04 s to 3 h.
Supply voltage: 24, 100 to 120, 200 to 230, 240 VAC (50/60 Hz);
12, 24, 48, 125, 100 to 110 VDC H7CX-A11SD1-N Communications Manual.
Mounting: Surface mounting (with PCB terminals).
Miniature Timer Compatible with the MY Relay.
Semi-multi power supply voltage.
Large transparent time setting knob facilitates time setting.
A flat-blade and Phillips screwdriver can also be used for time setting.
Pin configuration compatible with MY Power Relay.
LED indication for power and output statuses H7CX-A11SD1-N Communications Manual.
Conforms to EMC standards.
Conforms to EN 61812-1 and approved by UL and CSA. Timer input: PNP/NPN universal DC voltage input(4.5 to 30 VDC).
Display: 7-segment LCD with backlight.
Time range: 999999.9h ←→ 3999d23.9h(switchable); Light-gray body.
Seven digits, time range 0 to 3999d23.9h.
Dual time range: 999999.9 ←→ 3999d23.9h or,
999h59m59s ←→ 9999h59.9m. Supply voltage: 12 to 24 VDC.
6-digit total counter: Black.
DIN 48 x 24-mm Total Counter/Time Counter,
with Easy-to-read Displays and Water and,
Oil Resistance Equivalent to IP66.
High-visibility, negative transmissive LCD display with 8.5-mmhigh characters and, built-in red LED backlight at low power.
consumption.
IP66 with oil resistance and NEMA 4 protection achieved by,
unifying the front with the case and by using oill-resistant parts,
and materials H7CX-A11SD1-N Manual.
Compact (80 mm) body.
Just change a switch setting for either an NPN or PNP input.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents eleectrical shock,
and conforms to VDE0106, Part 100 H7CX-A11SD1-N Manual.
Certified for UL and CSA safety standards.
Complies with EMC standards (EN 61326) and CE Marking.