Number of outputs: 8 pts.
Max. switch-ing capacity: 2 A at 24 V DC.
External connector: Terminal block.
Weight: 200 g max.I/O Terminal Cover For 38-pin block, standard C500-COV12C500-RT SYSMAC BUS Remote I/O Master Slave Wired C500-RT002-PV1.
APF/PCF.With two optical connectorsModel: C200HW-PA204 CS1W-PDC55 Operation Manual.
Supply voltage: 100 to 120 VAC, 200 to 240 VAC.
Comments: ---.Name: CS1D CPU Unit for Single CPU Systems CS1W-PDC55
Specifications: Number of I/O points,
1280 points (3 Racks);
Program capacity, 30 Ksteps;
Data Memory, 64 Kwords(DM: 32 Kwords,
EM: 32 Kwords×1 bank);
LD execution time, 0.04 μs;
Duplex CPUs, --;
Interrupt functions, OK.
Current consumption: 5V system, 0.78A;
26V system, --.
Standards: UC1, N, L, CE CS1W-PDC55 Operation Manual.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables. Communi-cations cable: 100Base-TX.
CJ1W-ETN11 Ethernet Communications services: FINS communications, FTP server, socket services, and mail services.
Unit numbers: 0 to F (4 Units max.).Type: Counter inputs, pulse outputs.
12 DC inputs: Yes.
Counter inputs: 2.
Analog inputs: None CS1W-PDC55 Operation Manual.
8 transistor outputs: Yes.
2 pulse outputs: Yes.
2 analog outputs: No.Product name: CJ-series I/O Control Unit.
Specifications: One I/O Interface Unit is,
required on each Expansion Rack.
Connecting Cable: CS1W-CN@@3 Expansion,
Connecting Cable Mount to the right of,
the Power Supply Unit.
Current consumption: 5V , 0.02A;
24V, --.
Standards: UC1, N, L, CE.
Expand CJ/NJ-series with These Units.
To expand a CJ/NJ-series Controller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion Rack,
and connect the two Units with I/O Expansion Cable. Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 2.
No. of unit numbbers allocated: 1 CS1W-PDC55 Manual.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion networkk with one Position,
Control Unit that supports MECHATROLINK-II CS1W-PDC55 Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.