Name: Two-tier Screw Terminal Block.
Specifications: Outputs; 16 outputs; PNP.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CRT1-VOD32ML-B REFERENCE MANUAL CRT1-VOD32ML-B
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. I/O Slave Unit.
Number of words: 64Model: CPM2C-20EDR. Units with 20 I/O points.
1 I/O terminal block CRT1-VOD32ML-B REFERENCE MANUAL.
Inputs: 12 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: relay.Connects Power Supply Adapter and SYSMAC NET Link Unit.
Included with C200H-APS01.CV500-VP CPU Bus Unit Personal Computer Unit Main Mem CV500-VP227.
8-MB memory; w/floating-point processor.Size: 35mm.
Type: 4 lines.
Lighting voltage: DC24V.
Color: red.
Large tactile buttons and uniform lighting to create a general space CRT1-VOD32ML-B REFERENCE MANUAL.
Backlight brings a uniform, elegant and pleasant lighting.
Large tactile buttons are easier to touch.
Drive rod mechanism to keep the direction of the parallel button, even if the pressure on the side of the.
Damping mechanism to ensure high impact resistance.
A slim body with a thickness of 14.6 mm. Name: CompoBus/S Master Module.
Model: C200HW-SRM21-V1.
Communications protocol: Dedicated CompoBus/S protocol.

CompoBus/S Master Unit
High-speed ON/OFF Bus Saving Wiring Effort and Manufacturing Steps in Factories.Includes text book, cassette tape, and input switch board.C500-ID I/O Unit DC Input 64 pts C500-ID114(3G2A5-ID114).
DC12V 7mA.Name: Repeater Unit.
Specifications: A sub-trunk line can be,
connected downstream,
(for trunk-branch line configuration),
or further branching is enabled downstream,
(for configurations with no wiring restrictions),
in the same way as for a Master Unit.
A Repeater Unit can be used to branch,
the trunk line and increase the,
number of connected Units,
as well as to extend the length of the,
communications line.
Standards: CE, U, U1, L, N.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is supplied fromm the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection CRT1-VOD32ML-B Manual.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits CRT1-VOD32ML-B Manual.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application.