Model: C200H-ID211.
No. of inputs: 8 pts.
Input voltage: 12 to 24 VDC, +10%/–15%.
Input current: 10mA, 24VDC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 8 pts.
Internal currentcon-sump-tion: 10mName: Compact Connectors.
Specifications: Inputs; 4 outputs; PNP CQM1-DRT21 OPERATION MANUAL.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery CQM1-DRT21
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices.
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price CQM1-DRT21 OPERATION MANUAL.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications. H-PCF cable for Controller Link Units, cable length: 50 cm.C200H Accessory Programming Console Adapter C200H-BP001.Model: C200H-OC225.
No. of points: 16 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).SYSMAC NET Link Unit.
A Bus Connection Unit must be ordered separately CQM1-DRT21 OPERATION MANUAL.
C200HS Communications SYSMAC NET Interface C200HS-SNT32.Model: C200H-DA002.
Input points: 4.
Voltage input: –10 to 10V.
Current input: 4 to 20 mA.Product name: E@@S type CPU Units with 40 I/O Points.
Specifications: Power Supply, 100 to 240 VAC; Inputs, 24; Outputs, 16;
Output type: Relay.
Program capacity: 2K steps.
memory Data capacity: 2K words.
External powersupply(24 VDC): 0.30A.
Current consumption: 5 V, 0.17A; 24 V，0.09A.
Standards: CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Unit name: Loop Control Boards.
Specifications: No. of function blocks:
500 blocks max.
Standards: UC1, N, CE.
The open nature of the PLCs is joined,
by integrating hardware, software,
and networking to meet your needs CQM1-DRT21 Manual.
Increasing amounts of information,
standardization, and open standards,
form the basis for achieving hardware,
and networking capabilities for process control.
A wide raange of software that can be easily,
used by design, development, and maintenance,
personnel makes operating and maintaining,
the system far easier CQM1-DRT21 Manual.