A memory card suitable for Phoenix PCM+3.2 and one of thefollowing Bus Connection Units is required. No PC card is provided with the Unit.Model : CVM1-MP201-V2.
Position Control Unit (NC222) for.Model: C200H-OD219.
No. of points: 64 pts.
Specifications: 4.5 VDC, 16 mA to 26.4 VDC, 100 mA..
Weight: 250g max CP1E-NA20DR-A REFERENCE MANUAL. Model: CPM2C-8EDM. Units with inputs only.
1 MIL connector.
Inputs: 8 inputs CP1E-NA20DR-A
Outputs: ---.
Input type: 24 VDC.
Output type: --.Cover for 10-pin terminal block.
Terminal cover for 8-point or 5-point I/O Units.Model: C200H-OD21A.
No. of points: 16 pts.
Specifications: 1.0 A, 24 VDC. source type (PNP). with load short protection.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K CP1E-NA20DR-A REFERENCE MANUAL.
RS-232C port: YES.Name: Two-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-NA20DR-A REFERENCE MANUAL.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model: C200H-ME431.
Description: EEPROM, 4K words, no clock.100 to 120/200 to 240 VAC (switchable), APF/PCF.Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.Unit type: CJ1 Basic I/O Units.
Product name: DC Input Units.
Specifications: I/O points, 16 inputs;
Input voltage and current: 24 VDC, 7 mA;
Commons, 16 points, 1 common; External connection,
Removable terminal block; No. of words allocated,1 word.
Current consumptiion: 5V, 0 CP1E-NA20DR-A Manual. 08A; 24V, --.
Standards: UC1, N, L, CE.
A Wide Range of Basic Input,
Units for High Speed Input and,
Different Applications.
Receive ON/OFF signals from external,
devices into the PLC System to update,
I/O memmory in the CPU Unit CP1E-NA20DR-A Manual.
New high-speed input models CJ1W-ID212 and,
CJ1W-ID233 are now available. These units can,
help to increase system throughput.