C200HW Communications Interface Module C200HW-PRT21Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 8 outputs;
Signal range selection:
Set separately for each output.
Signal range, Resolution: 4 to 20mA;
1/4,000 (Settable to 1/8,000) *2.
Conversion period: 1 ms/point,
(Settable to 250 μs/point)*2 CP1E-N60DT1-D PROGRAMMING MANUAL.
Accuracy at ambient temperature of 25°C:
±0 CP1E-N60DT1-D3% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 170mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.14A; 24V, 0.17*3.
Standards: UC1, N, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup CP1E-N60DT1-D PROGRAMMING MANUAL.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals. Supply voltage: 24V DC.
Output capacity: DC5V, 6.5A.Model: CPM2C-8ET1C. Units with relay outputs only.
1 Fujitsu connector.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Unit type: CS-series Special I/O Units.
Product name: Analog Input Units CP1E-N60DT1-D PROGRAMMING MANUAL.
Specifications: I/O points, 8 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max.
(Settable to 1 ms/point).
Externa connection, Removable terminal block.
Current consumption: 5V, 0.12A; 26V, 0.09A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Model: C200H-OC2223 CP1E-N60DT1-D Manual.
No. of points: 5 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).No. of I/O slots: 8 slots.Connects Power Supply Adapter and SYSMAC NET Link Unit.
Included with C200H-APS01.Name: Position Control Module.
Model: C2200HW-NC413 CP1E-N60DT1-D Manual.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 4.