Model: C200HW-BI051.
No. of I/O slots: 5 slots.C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD001(3G2A5-AD001).
Input: 2 pts.
Specification: +1~+5V, 4~20mA.Applicable CPU Units: CQM1H-CPU51/61.
Pulse inputs: 4 inputs.
External outputs: 4 outputS.
Current consumption (Supplied from Power Supply Unit): 5 V DC, 400 mA max CP1E-E40DR-A OPERATION MANUAL.
Dimensions: 25 × 110 × 107 mm (W × H × D) CP1E-E40DR-A
Weight: 90 g max.
Size: 60mm.
Type: 4 lines.
Lighting voltage: DC24V.
Color: pure white.
Large tactile buttons and uniform lighting to create a general space.
Backlight brings a uniform, elegant and pleasant lighting.
Large tactile buttons are easier to touch.
Drive rod mechanism to keep the direction of the parallel button, even if the pressure on the side of the CP1E-E40DR-A OPERATION MANUAL.
Damping mechanism to ensure high impact resistance.
A slim body with a thickness of 14.6 mm. Number of outputs: 8 pts.
Max. switch-ing capacity: 1.0 A at 24 V DC.
External connector: Terminal block.
Weight: 240 g max.C500-ID I/O Unit DC Input 32 pts C500-ID218CN(3G2A5-ID218CN).
DC12-24V 10mA.Model: C200H-BC051-V2.
No. of I/O slots: 5 slots CP1E-E40DR-A OPERATION MANUAL. Output method: Relay.
Inputs: ---.
Outputs: 32.CV500-RT SYSMAC BUS Remote I/O Slave Unit (optical) CV500-RT211.
Light type.Unit type: CJ1 CPU Bus Units.
Product Name: Serial Communications nits.
Specifications:Communications Interface,
2 RS-232C ports;
Communications functions,
The following functions can be,
selected for each port:
Protocol macro Host Link,
NT Links (1:N mode)Serial Gateway,
No-protocol Modbus-RTU Slave.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.28A; 24V,--.
Standards: UC1, N, L, CE.
The Serial Communications Units That Enable,
High-speed Connections with External Devices.
Each Serial Communications Unit provides two,
serial communications ports: RS-232C and,
RS-422A/485, and the serial communications,
mode can be set separately for each port from,
Protocol Macro, Host Link, NT Link,
Serial Gateway, and No-protocol. Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Resistance Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100.
Conversion speed (resolution):
100 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.15A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacce compared,
with previous systems CP1E-E40DR-A Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1E-E40DR-A Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.