Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.Fitting materials: Iron, zinc plating E5EN-HTAA2HBMD-500 User's Manual.
Count: 1.
Accessories: Description, Slotted/Phillips screws, M3 × 12(with spring washers);
Material, Iron, zinc plating; Count, 2 E5EN-HTAA2HBMD-500
Applicable sensor (mounting pitch on sensor side): E3C-S50 (8).
Page: Dimensions, 5.
Appearance: 4 dia.
Sensing distance: 1.2 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NO E5EN-HTAA2HBMD-500 User's Manual.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning E5EN-HTAA2HBMD-500 User's Manual.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Size: M12 (Brass); Single; Shielded.
Sensing distance: 10 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. Size:: 72 x 72mm E5EN-HTAA2HBMD-500 MANUAL.
Type: thermocouple type.
Adjustment mode: ON/OFF action or PID action.
Alarm: single alarm.
Output: voltage output (for driving SSR).
Temperature controller with single alarm output.
SV and PV can be displayed at the same time E5EN-HTAA2HBMD-500 MANUAL.
Multiple temperature range allows setting the optimum temperature range.
The protection function can prevent the error in operation.