E32-D25XB type: standard type; resistance to twists and turns,
Specialty: flat shape (small),
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsName: Temperature Controller (See note 1.).
Power supply: 24 VDC.
No. of control points: 2 E5CN-HV2BD USER'S MANUAL.
Control output: Analog output (current output) (See note 2 E5CN-HV2BD).
Auxiliary output: Transistor output: 2 pts (sourcing).
Functions: Transfer output (linear voltage output)(See note 2.), Heating or heat/cool,
control is selectable (See note 4.)Event input: 1 point per Unit.
Communications functions: RS-485.
Input type (See note 5.): Platinum resistance thermometer.
New DIN Track Mounting Temperature E5CN-HV2BD USER'S MANUAL.
Controller.
Two channels of temperature control available despite width of,
only 22.5 mm.
The Temperature Controller itself can be replaced without,
changing terminal wiring.
Use in combination with a compact Setting Display Unit to,
reduce communications programming requirements.
Front-panel LED indicators for easy operation monitoring.
Power supply and communications wiring not required between,
Units when mounted side-by-side E5CN-HV2BD USER'S MANUAL.
CompoWay/F communications protocol supported.
UL, CSA, and CE Marking compliance. Pressure range: Negative pressure; 0 to -101 kPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: PNP output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes.
Perform automatic teaching simply by teaching pressuree,
values for good and bad products E5CN-HV2BD MANUAL.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode. Temperature controller for temperature sensing part.
In the application field of packaging molding machine is wideely used,
Further strengthened the high cost models E5CN-HV2BD MANUAL.
Easy to install / replace the structure.
With springs, you can use the active part (E52Z-CA1D-40).