Size: 1/16 DIN 48 × 48 × 78 (W × H × D).
Power supply voltage: 100 to 240 VAC.
Input type: Thermocouple or Resistance thermometer.
Alarm output: 2.
option units Mounting: No.
Control output: Relay output.
Previous mode: E5CZ-R2.
This Best-selling General-purpose,
48×48-mm Temperature Controller,
Is Now Even Better E5CN-C2TU INSTRUCTION Manual.
Controllers now available with analog inputs E5CN-C2TU
Faster sampling at 250 ms.
Transfer output provided for easy output to recorders.
Models available with a loop break alarm (LBA) and,
heater short alarm (HS alarm).
Easy setting with 11-segment displays.
Setting protection indicator informs operator when,
protection is enabled.
Manual output provided.
New protocol called Modbus is installed in the models,
with communications E5CN-C2TU INSTRUCTION Manual.
USB-Serial conversion cable is available.
Note: Refer to Precautions on page 33. New DIN Track Mounting Temperature.
Controller.
Two channels of temperature control available despite width of,
only 22.5 mm.
The Temperature Controller itself can be replaced without,
changing terminal wiring.
Use in combination with a compact Setting Display Unit to,
reduce communications programming requirements E5CN-C2TU INSTRUCTION Manual.
Front-panel LED indicators for easy operation monitoring.
Power supply and communications wiring not required between,
Units when mounted side-by-side.
CompoWay/F communications protocol supported.
UL, CSA, and CE Marking compliance. Appearance: Shielded, 8 dia.
Sensing distance: 2 mm.
Output configuration: DC 2-wire (polarity).
Model: Operation mode: NO.
Improved Durability with.
Stainless Steel Sensing.
Head.
Models with improved spatter resistance ideal,
for welding also available. Temperature range: -10.0 ~ 40.
Positive / inversee action: anti movement (heating) E5CN-C2TU Manual.
Adjustment mode: OFF, ON action.
With the aid of microcomputer, the temperature control can be realized with high precision (0.1 degrees C).
Combined use of control equipment, adjustable sensitivitty E5CN-C2TU Manual.
Attached to facilitate the energy saving operation of the set value conversion function, as well as ease of operation to stop the control function.