LK Automation Limited LK Automation Limited
Download Sort: OMRON
Home >> Manual Download
E5CC-QX2DSM-000 INSTRUCTION Manual ()
Product model: E5CC-QX2DSM-000
Name: digital controller
Brand: OMRON
Sort: INSTRUCTION Manual
File language: English
Type: Ultra-long-term APC models.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years E5CC-QX2DSM-000 INSTRUCTION Manual E5CC-QX2DSM-000
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects E5CC-QX2DSM-000 INSTRUCTION Manual.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit. Size: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 61 (75).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 E5CC-QX2DSM-000 INSTRUCTION Manual. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E32-A04-1 type: special beam type; wafer mapping,
Specialty: ultra thin type (t=2mm); opening angle 3 degree adjustment optical axis after the factory,
Bending radius (mm): R10.
Fiber element for meeting diversified needsSize: 48 x 96mm.
Category: power AC100 ~ 240V with.
Shell color: black.
Control output 1: position ratio with relay output.
Control output 2: position ratio with relay output.
Control mode: position ratio control.
Auxiliary output points: 2 points.
Event entry point: 2.
Transfer output: transfer output (special terminal).
Remote SP:4 to 20mA input.
Communication: -.
General thermostat new high performance (high resolution, high speed, high precision input) type products.
Support simple operation, preventive maintenance.
A new type of liquid crystal, which can communicate with the front through the infrared port, is adopted,
Visual angle, contrast can be improved.
High resolution 5 bit display / can display 0.01 degrees C.
High speed sampling period 60ms.
All models complete a variety of (to the thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensors.
Also supports remote SP.
Add PV/SV status display function, convenient to check the sstate of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactive display PV/SV E5CC-QX2DSM-000 Manual.
By supporting software (Ver.4.0 CX-Thermo) to carry out a simple function (AND/OR logic and delay),
Be able to execute flexible contact output E5CC-QX2DSM-000 Manual.
Increase the control output ON/OFF number counting function, can predict the temperature controller internal relay fault.
Position ratio type.
Related products
OMRON
Digital temperature controller
E5CC-QX3ASM-007
OMRON Digital temperature controller E5CC-QX3ASM-007
Size: 48 x 48mm. Control output 1: volt
OMRON
Digital temperature controller
E5EC-CQ2DSM-000
OMRON Digital temperature controller E5EC-CQ2DSM-000
Size: 48 x 96mm. Control output 1: line
OMRON
Digital temperature controller
E5CC-QX3DSM-000
OMRON Digital temperature controller E5CC-QX3DSM-000
Size: 48 x 48mm. Control output 1: volt
OMRON
Digital temperature controller
E5CC-QX0DUM-000
OMRON Digital temperature controller E5CC-QX0DUM-000
Size: 48 x 48mm. Control output: voltag