Appearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: No incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting E2F-X5Y2-53 INSTRUCTION sheet.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC E2F-X5Y2-53 Item: Water-resistant models.
Connection method: Pre-wired (2 m).
Ratings and Specifications: Degree of protection: IP66.
Model: PNP output.
Simple and Affordable Fiber Amplifier Units.
Reasonable price.
Use the one-key one-function feature for quick,
easy operation.
GIGA RAY for the highest level of power in this class for,
stable detection even with sensing objects with low E2F-X5Y2-53 INSTRUCTION sheet.
reflection or large sensing objects. E32-D36P1 type: special beam; Coaxial / spot,
Specialty: M6 screw,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsName: Special Reflector for E3ZM-B.
Directional angle: 30° min.
Ambient operating temperature range: -25 to 55°C E2F-X5Y2-53 INSTRUCTION sheet.
Ambient storage temperature range: 0 to 40°C.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 85%.
Degree of protection: --.
Accessories: Phillips screws M3 × 8, spring washers M3, nuts M3. Small, easy to use.
Detection mode: on the radio.
Shape: horizontal type.
Connection mode: lead wire.
Detection distance: 2 meters of red light.
Output mode: PNP output. Appearance: Unshielded, M12.
Sensing distance: 8 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. Size: 48 x 96mm.
Type: power AC/DC24V with.
Shell color: black.
Control output 1: built-in SSR output.
Control output 2: built-in SSR output.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
The detection function of the broken wire and SSR fault of heater: detection function of single phase or three phase heater.
Event entry point: 2.
Transfer output: -.
Remote SP:4 to 20mA input.
Communication: RS-485.
General thermostat new high performance (high resolution, high speed, high precision input) type products.
Support simple operation, preventive maintenance.
A new type of liquid crystal, which can communicate with the front through the infrared port, is adopted,
Visual angle, contrast can be improved.
High resolution 5 bit display / can display 0.01 degrees C.
High speed sampling period 60ms.
All models complete a variety of (to the thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensors.
Also supports remote SP.
Add PV/SV status display function, convenient to check tthe state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactive display PV/SV E2F-X5Y2-53 Manual.
By supporting software (Ver.4.0 CX-Thermo) to carry out a simple function (AND/OR logic and delay),
Be able to execute flexible contact output E2F-X5Y2-53 Manual.
Increase the control output ON/OFF number counting function, can predict the temperature controller internal relay fault.
Position ratio type.