LK Automation Limited LK Automation Limited
Download Sort: OMRON
Home >> Manual Download
CS1D-CPU67H REFERENCE MANUAL (Communications Commands)
Product model: CS1D-CPU67H
Name: PLC
Brand: OMRON
Sort: Communications Commands REFERENCE MANUAL
File language: English
I/O Link of 32 input bits and 32 output bits Unit type: CS-series Special I/O Units.
Product name: Analog Input Units.
Specifications: I/O points, 8 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max CS1D-CPU67H REFERENCE MANUAL.
(Settable to 1 ms/point) CS1D-CPU67H
Externa connection, Removable terminal block.
Current consumption: 5V, 0.12A; 26V, 0.09A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. 4 Axis Position Control and Comprehensive Programmable Controller CS1D-CPU67H REFERENCE MANUAL.
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O. Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 16 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CS1D-CPU67H REFERENCE MANUAL.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit type: CJ1 CPU Bus Unit.
Product Name: Controller Link Unit.
Specifications:Communications cable,
Wired shielded wisted-pair cable ;
Communications type,
Data links and message service;
Duplex support, No;
Max. Units mountable per CPU Unit, 8;
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.35A; 24V,--.
Standards: UC1, N, L, CE.
New Controller Link Units,
Now with 4,000 Send Words.
The Controller Link is an FA,
network that can send and receive,
large aamounts of data easily,
and at high speed CS1D-CPU67H Manual.
The Controller Link supports data,
links that enable sharing,
data between PLCs and computers,
and a message service that enables,
sending and receiving data whenever required.
Systtems can be flexibly built by using Repeater,
Units to enable T-branches, long-distance wiring,
and converting part of the network to optical cable CS1D-CPU67H Manual.
Related products
OMRON
Programmable Controllers
CS1D-BC042D
OMRON Programmable Controllers CS1D-BC042D
Name: CS1D CPU Backplane. Specification
OMRON
CS1D-CN051
OMRON  CS1D-CN051
H-PCF cale for Controller Link Units, c
OMRON
Programmable Controllers
CS1D-CPU67H
OMRON Programmable Controllers CS1D-CPU67H
Name: CS1D CPU Unit for Duplex CPU Syste
OMRON
Programmable Controllers
CJ1H-CPU67H
OMRON Programmable Controllers CJ1H-CPU67H
I/O capacity/Mountale Units Expansion R