Remote use, microwave transmission for long distance.
ID sensor unit is a kind of non contact type identification system,
For unified products, unified production and unified control data,
Effectively produce quantity of products.
Information on the factory automation identification system, there are classified samples can be provided CJ2H-CPU66 INSTRUCTIONS REFERENCE MANUAL. C500-ID Special I/O Unit ID Sensor Unit General Purpose C500-IDS01-V2Model : CV1000-DM151 CJ2H-CPU66
Available CV1000/2000/CVM1-CPU21-V2.
128k words.Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming;
No CJ2H-CPU66 INSTRUCTIONS REFERENCE MANUAL. of axes: 2 axes.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control.
A wide range of position control,
functions are available with,
this position control unit CJ2H-CPU66 INSTRUCTIONS REFERENCE MANUAL.
Name: External Connector.
Model: C500-CE403.
Specifications: Pressure welded terminal; 40p.Model: CPM2C-8ET1C. Units with relay outputs only.
1 Fujitsu connector.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CJ2H-CPU66 Manual.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CJ2H-CPU66 Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.