Model : CV500-CPU01-V1.
SFC / Ladder 512 (with RAM30K words, the top internal link).Model : CVM1D-PA212.
12A.
Attach two things in the same format in each base Please you.C500-OA I/O Unit Triac Output 16 pts C500-OA121(3G2A5-OA121).
AC132V 1A.I/O capacity: 512 pts (2, 048 max. with remote I/O).
Execution time: Basic: 0 CJ1H-CPU64H-R INSTRUCTIONS REFERENCE MANUAL. 15 µs min.Special: 0.6 µs min CJ1H-CPU64H-R
Model : CV500-IPS01.
Input: 100 to 120/200 to 240 VAC Output: 2A, 24 VDCI/O Cable (for I/O to Interface Racks) 2 m (L) CV500-CN222Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No CJ1H-CPU64H-R INSTRUCTIONS REFERENCE MANUAL. of axes: 4.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion network with one Position,
Control Unit that supports MECHATROLINK-II CJ1H-CPU64H-R INSTRUCTIONS REFERENCE MANUAL.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association. C200H CPU 100/200-240VAC C200H-CPU02-E.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Resistance Thermocouple Input Units.
points Input: 8 inputs.
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100.
Conversion speed (resolution):
250 ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacee compared,
with previous systems CJ1H-CPU64H-R Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CJ1H-CPU64H-R Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.